Jump to main content or area navigation.

Contact Us

TRI Explorer

Recent Changes

November 6, 2013

TRI Explorer was updated with the 2012 National Analysis data set.

September 11, 2013

  • A preliminary dataset for reporting year (RY) 2012 has been released through TRI Explorer. The 2012 TRI dataset is not yet complete. The complete dataset is anticipated to be updated later this year to reflect the data used for the TRI National Analysis.
  • TRI specific queries, including TRI Explorer, are now using a new process for Tribal filters.
  • All TRI Explorer reports now include a option to filter results by EPA Region. This option is selected under the "Geographic Location" drop down box. Previously only Geography reports contained an EPA Region filter. This option is not applicable to Dynamic Map reports.

March 4, 2013

Routine data update for Reporting Year 2011 and earlier.

November 1, 2012

TRI Explorer was updated with the 2011 National Analysis data set.

September 28, 2012

  • A preliminary dataset for reporting year (RY) 2011 has been released through TRI Explorer. The 2011 TRI dataset is not yet complete. This dataset will be updated in October to reflect the data used for the TRI National Analysis.
  • EPA is now using new data sources supporting Tribal filters available under Geographic Location option in Facility Reports and Industry Reports. In a few situations, nomenclature used for identification may have slightly changed from previous TRI Explorer datasets.
  • An issue involving the display of Latitude and Longitude values for some facilities is currently being investigated. There is a possibility this could impact the results displayed when a tribal filter is invoked.

March 12, 2012

Routine data update for Reporting Year 2010 and earlier.

November 10, 2011

  • Added a new chemical grouping – CERCLA Hazardous Substances.
  • Minor wording updates to improve consistency throughout pages.

October 27, 2011

TRI Explorer was updated with the 2010 National Analysis data set.

September 22, 2011

TRI data has been updated with a preliminary dataset for reporting year (RY) 2010. Since EPA is still conducting a Quality Assurance review of this data, some data may change prior to release of the dataset to be used to prepare the National Analysis.

September 13, 2011

A bug was corrected which was suppressing a few data values. This bug only involved facilities who submitted revisions to EPA during a narrow window of time and only involved the specific chemical release data being revised. Although very few affected facilities were identified, a patch was applied across the entire data set to correct any other potential occurrences.

August 3, 2011

The backend software running TRI Explorer has been migrated from the SAS platform to Oracle. Versioning numbers will no longer appear on the user interface

During the migration, a few business rules were revised. The changes involved the prioritization to locate appropriate EPA data when certain fields in the original TRI submissions were either left blank or contained invalid data. These data fields are the facility's NAICS (Section 4.5), and the RCRA ID (Section 6.2) of the receiving facilities when material is transferred offsite. The revised process is more in parallel with other TRI Envirofacts queries and will reduce some apparent discrepancies.

March 30, 2011

A bug was corrected affecting reports when the "Chemical" selected was "2001 Core Chemical" group and the "Year of Data" was 2000 or earlier.

December 16, 2010

TRI Explorer version 5.1 was released on December 16, 2010 at the same time as the 2009 National Analysis. This version includes the following change:

  • The most recent set of TRI data submitted to and processed by EPA.
  • Improved consistency in the naming convention for "Parent Company Name"
  • A new option to improve performance when working with very large tables. When the result of a query may produce several hundred rows, only the top 100 rows are initially presented, as in prior versions. This latest version of TRI Explorer provides a next page option when a user requests 200 or more rows of data to be returned. A user retains full control in selecting the number of rows displayed per page (200 to 25,000).

August 17,2010

The preliminary dataset for reporting year (RY) 2009 has been updated with dataset 3. Preliminary dataset 2 was never released to the public since set 3 was available and incorporated into TRI Explorer sooner than anticipated. All other TRI data access vehicles followed the same data release pattern. One additional update to the RY 2009 preliminary data is likely to occur prior to the National Analysis.

July 27,2010

TRI Explorer version 5.01 was released on July 27, 2010. This release includes EPA's first preliminary dataset for reporting year (RY) 2009. Since EPA is still processing reports submitted for RY 2009, not all 2009 data is currently available. The preliminary data is displayed in a new TRI report format designed specifically for the preliminary data. This format includes a composite of RY 2009 with selected RY 2008 data.

Facility Reports include an additional set of geographic filters. The geographic scope of Facility Reports may now be limited to Indian Country and Alaska Native Village Statistical Areas (ANVSA).

June 24,2010

TRI Explorer version 5.0 was released on June 24, 2010. Breaking from convention, this was a software update only - no data was updated with this release. This version includes three categories of changes, new features, functionality, and increased transparency. No previous features or data availability have been eliminated.

New Features include:

Additional Drill Down Capabilities: The first column of all reports now provides a route to drill down to a related report. Previously this feature was only available in the facility report which goes to the facility profile report. In most cases the new drill down will go directly to a facility report. The exception is a new EPA regional view which has intermediary drill downs prior to the facility report.

New Options in Geography Report: In a geography report two new options include the ability to aggregate and sort the data by either entire US by EPA region or by entire US ZIP code.

New Down Loading and Viewing Options. A downloaded file of a report is now available in Excel format. Previously only a CSV format was available. A user can now view a report in either PDF or Rich Text (RTF) format which can then be saved in the format being viewed. Previously only a standard HTML view was available. The choice to view a report in landscape mode is also a new option.

Sort Against Entire Results Set: When a user sorts a column, the sort now is performed against the entire set of query results. Previously, the sort function only acted upon the results shown on the screen.

Facility Reports Include Zip Code and County Information: In a Facility Report, the zip code and county of the facility is now included with the address information. Previously these data elements were only available in the Facility Profile Report.

Industry Code Used for Industry Filter Now Displayed. In a Facility Profile Report both the industry code reported by a facility and the code used by TRI Explorer for aggregation purposes are displayed. Although facilities report a full 6 digit NAICS code, TRI Explorer only uses the industry code down to the 3 or 4 digit level. There are also a small number of industries which fall under an industry code which may differ from the facility's reported code. One such situation is logging which although has a NAICS code of 113310, for aggregation purposes is included under NAICS 339 Miscellaneous Manufacturing.

March 29,2010

An inconsistency in all EPA data systems has been corrected in how the last reporting year of a delisted chemical was specified. Prior to implementing this correction, some TRI Explorer reports may have omitted release, transfer and waste managed quantities in the last reportable year for a few chemicals.

December 8, 2009

TRI Explorer version 4.9 was released on December 8, 2009 at the same time as the 2008 National Analysis. This version includes the following change:

  • This is the first year toxic equivalents (TEQ) values for Dioxins are being made available to the public. See TRI Dioxin and Dioxin-like Compounds Toxic Equivalency (TEQ) Information Rule- Final rule for more information on TEQs. Facility Reports starting with reporting year 2008 will now include a new table to display TEQ values for facilities which have provided EPA with sufficient information to make the calculation. Tables displaying the Dioxin distribution by category will no longer be displayed in TRI Explorer beginning with reporting year 2008. The data will still be available through Envirofacts. Since TEQ values are not available for 100% of reporting facilities, TEQ tables are not included in reports where a partial data set could skew the interpretation of the results for many users.
  • The term Public Data Release is being phased out during reporting year 2008. EPA has begun making the TRI data available to the public earlier in the data collection, verification, and analysis cycle.

March 19, 2009

TRI Explorer version 4.8 was released on March 19, 2009 at the same time as the 2007 Public Data Release. This version includes the following change:

  • The TRI Explorer application uses a revised method of data acquisition. This allows for a faster internal updating process. Periodic data updates (typically mid year) can now be released in TRI Explorer simultaneously with the data being release in TRI Envirofacts.
  • TRI Explorer is undergoing a major maintenance program to improve performance and data delivery options.

February 21, 2008

TRI Explorer version 4.7 was released on February 21, 2008 at the same time as the 2006 Public Data Release. This version includes the following changes:

  • EPA finalized its TRI NAICS Rule, which requires owners and operators of facilities subject to the TRI reporting requirements to report North American Industry Classification System (NAICS) codes on their submissions instead of Standard Industrial Classification (SIC) codes, beginning with reports due July 1, 2007 (i.e., reporting year 2006). Thus when reporting releases and other waste management quantities to EPA's TRI Program, facilities must identify their principal business activities using 2002 NAICS codes instead of SIC codes.
  • Detail columns in online release reports are collapsed by default (Feature not in Trends Reports). Click the icon to view additional columns. Use your Browser back feature to collapse the columns or alternately you can select / deselect desired columns from the input selection screen.
  • Chemical reports now include an optional Chemical Abstracts Service (CAS) number column.

March 22, 2007

TRI Explorer version 4.6 was released on March 22, 2007 at the same time as the 2005 Public Data Release. This version includes the following changes:

  • The latitude and longitude data and Program identification (ID) numbers including Resource Conservation and Recovery Act (RCRA) number were obtained from the Facility Registry System (FRS), EPA's centralized database system for facility information. That system gathered these data elements from existing data, other EPA programs, state and local government and commercial sources.
  • If a few instances, both a range code and an estimated release (or transfer) quantity appear in Form R reports contained herein. When performing analyses in such instances, TRI Explorer will automatically use the reported estimated quantity in lieu of the range code when the estimated quantity is greater than zero. In instances in which the estimated quantity is zero, TRI Explorer will use the reported range code in lieu of the zero quantity.

April 12, 2006

TRI Explorer version 4.5 was released on April 12, 2006 at the same time as the 2004 Public Data Release. In this version:

  • Methyl ethyl ketone (MEK) has been delisted (effective June 30, 2005) and, therefore, TRI Explorer version 4.5 does not contain data pertaining to methyl ethyl ketone for reporting year 2004.
  • A CORE 2001 chemical group was created but only made available in trends reports. It will be available in other reports soon.
  • The new TRI Data Mart tool is under development and will eventually replace TRI Explorer
  • Trend Waste Quantity Reports have been modified to reflect the change to part II section 8.1 that was replaced with 8.1A, 8.1B, 8.1C, and 8.1D in RY 2003. The new columns are included to facilitate trends analysis.
  • Naphthalene is now classified as an OSHA carcinogen, and has been given a de minimis level of 0.1% (previous de minimis level was 1%).

May 11, 2005

TRI Explorer version 4.4 was released on May 11, 2005 at the same time as the 2003 Public Data Release. Beginning with the 2003 PDR, EPA has modified the way in which it uses the Standard Industrial Classification (SIC) code as reported by the facility for analysis purposes. Some facilities that were reporting to the TRI prior to the 1998 facility expansion rule began to report one of the newly added SIC codes after this rule was promulgated. However, in an effort to maintain trend analysis, EPA kept those facilities in the SIC code they had reported in prior to 1998. In EPA’s continuing effort to modernize its data access systems and to improve the transparency and the reproducibility of our analysis, EPA will no longer keep those facilities in their previously reported SIC codes. Instead, the primary SIC code as reported by the facility will now be used for all analysis purposes. This change results in a more accurate portrayal of the data as it is reported to the TRI. EPA has applied this new logic to all data within the TRI database (i.e., applied to all trends starting with 1988 data). Therefore, data users should note that previous year’s PDRs may not be easily comparable with the data in TRI Explorer since the previous PDRs used the former methodology when analyzing by SIC codes

June 23, 2004

TRI Explorer version 4.3 was released on June 23, 2004 at the same time as the release of the 2002 TRI data. The 2002 TRI reporting year data were submitted by facilities on July 1, 2003 and includes revisions received by EPA as of March 3, 2004. In response to comments received by EPA from TRI stakeholders, several changes were implemented, including a new format for the Release Report tables for Reporting Year (RY) 2002 data. These changes do not collect any new or different information than what has been previously collected. Instead it now clearly identifies the categories for reporting releases and other waste management activities of toxic chemicals. Also, this change in the presentation of the data is consistent with the recent minor changes EPA made to the Form R. In addition, a number of enhancements to the system were added, including:

  • Electronic versions of the National and State Fact Sheets. Previously available only in print copies, these fact sheets summarize TRI data for the U.S. and each State, and they provide an interactive dynamic map.
  • Federal facility reports. This new report allows users to access TRI data from federal facilities nationwide.

June 30, 2003

TRI Explorer version 4.1 was launched at the same time as the release of the 2001 TRI data. The 2001 TRI reporting year data were submitted by facilities