Jump to main content.

Local Navigation

HPVIS Ad hoc Query

Selection of Columns

STEP 2: Select one or more column(s) for your output by clicking on the square box next to the column name. When you are finished selecting columns, click on the "STEP 3: Enter Search Criteria" button at the bottom of this page.

  

QUERY NAME: Transport Between Compartments Data, TABLE NAME: V_FATE_SIDS_3_EZ
Category Chemical CAS Number A standardized number assigned by the Chemical Abstracts Service (CAS) to identify a chemical (e.g., 10595-60-5).
Category Chemical Name The ninth collective index name of the category chemical.
Consortium Name The names of the companies that belong to the consortium or partnership if applicable.
Deviations from Test Guideline Flag Indication that a study contains deviations from the standard test protocol.
GLP Indicate if the study was conducted following Good Laboratory Practice standards. Enter Not Applicable for studies involving estimated values.
Key Study Sponsor Indicator An indicator entered by the sponsor specifying whether or not the Robust Summary's test results for this endpoint are summarized from a "key" or "critical" study.
Loss by Advection (percent) The percentage lost by advection, derived from a level II or level III multimedia model, for the air compartment.
Loss by Reaction (percent) The percentage lost by reaction, derived from a level II or level III multimedia model, for the air compartment.
Mass Distribution (percent) The predicted percentage of the test substance, derived from a multimedia model, at equilibrium (level I and II models) or steady state (level III model), in the air, water, soil, and sediment compartment.
Mass Distribution -- Sediment The predicted percentage of the test substance, derived from a multimedia model, at equilibrium (level I and II models) or steady state (level III model), in the sediment compartment.
Mass Distribution -- Soil The predicted percentage of the test substance, derived from a multimedia model, at equilibrium (level I and II models) or steady state (level III model), in the soil compartment.
Mass Distribution -- Water The predicted percentage of the test substance, derived from a multimedia model, at equilibrium (level I and II models) or steady state (level III model), in the water compartment.
Method/Guideline Description Description of the test protocol, guideline or estimation method used in the study, if other than an OECD, USEPA, or other published test guideline.
Method/Guideline Followed The name of the Method or Guideline followed in performing the study.
Model Concentration -- Air The predicted concentration derived from a multimedia model for the air compartment.
Model Concentration -- Sediment The predicted concentration derived from a multimedia model for the sediment compartment.
Model Concentration -- Soil The predicted concentration derived from a multimedia model for the soil compartment.
Model Concentration -- Water The predicted concentration derived from a multimedia model for the water compartment.
Model Inputs: Chemical Properties: Henry's Law Constant The Henry's Law constant value used as input to run a multimedia model, or (if applicable) estimate one of the other transport/distribution endpoint subtypes. Provide a reference in the Results Remarks.
Model Inputs: Air Emissions A description of the Emissions used in the multimedia model, in kg/hr, for air.
Model Inputs: Chemical Properties: log KOW For Transport/Distribution, the log KOW value used as input to run a multimedia model, or (if applicable) estimate one of the other transport/distribution endpoints such as KOC. For bioaccumulation, log KOW can assist in interpretation of the measured or estimated BCF value; it may also be used to estimate BCF from chemical structure. Provide a reference in the Results Remarks.
Model Inputs: Chemical Properties: Melting Point The melting point value used as input to run a multimedia model, or (if applicable) estimate one of the other transport/distribution endpoint subtypes. Provide a reference in the Results Remarks.
Model Inputs: Chemical Properties: Vapor Pressure The vapor pressure value used as input to run a multimedia model, or (if applicable) estimate one of the other transport/distribution endpoint subtypes such as Henry's Law constant (Hc). Provide a reference in the Results Remarks.
Model Inputs: Chemical Properties: Water Solubility The water solubility value used as input to run a multimedia model, or (if applicable) estimate one of the other transport/distribution endpoint subtypes such as Henry's Law constant (Hc). Provide a reference in the Results Remarks.
Model Inputs: Half-Life Reaction half-lives (with units) required to run a level II, III or IV multimedia model. Provide a reference in the Results Remarks.
Model Inputs: Sediment Half-Life Reaction half-lives (with units) required to run a level II, III or IV multimedia model. Provide a reference in the Results Remarks.
Model Inputs: Soil Emissions A description of the Emissions used in the multimedia model, in kg/hr, for soil.
Model Inputs: Soil Half-Life Reaction half-lives (with units) required to run a level II, III or IV multimedia model. Provide a reference in the Results Remarks.
Model Inputs: Water Emissions A description of the Emissions used in the multimedia model, in kg/hr, for water.
Model Inputs: Water Half-Life Reaction half-lives (with units) required to run a level II, III or IV multimedia model. Provide a reference in the Results Remarks.
Multimedia Model Level Level of multimedia (fugacity) model: I, II, or III
Percent Lost Advection -- Sediment The percentage lost by advection, derived from a level II or level III multimedia model, for the sediment compartment.
Percent Lost Advection -- Soil The percentage lost by advection, derived from a level II or level III multimedia model, for the soil compartment.
Percent Lost Advection -- Water The percentage lost by advection, derived from a level II or level III multimedia model, for the water compartment.
Percent Lost Reaction -- Sediment The percentage lost by reaction, derived from a level II or level III multimedia model, for the sediment compartment.
Percent Lost Reaction -- Soil The percentage lost by reaction, derived from a level II or level III multimedia model, for the soil compartment.
Percent Lost Reaction -- Water The percentage lost by reaction, derived from a level II or level III multimedia model, for the water compartment.
Program Flag Program that the submission is associated with.
Reliability Indication of the adequacy of data at the discretion of the person preparing the Robust Summary.
Reliability Remarks Comments about how the reliability of data was determined and other related remarks. If a numeric or other coded system, such as Klimisch Codes are used to denote reliability, identify and/or define the coding system.
Results Remarks Sponsor provided additional descriptive text about the results of the study.
Sponsor Name The name of the individual company or consortium (i.e., two or more companies) making a commitment in the HPV Challenge Program to provide data for a chemical or category of chemicals (e.g., Eastman Chemical Company).
Sponsored Chemical CAS Number A standardized number assigned by the Chemical Abstracts Service (CAS) to identify a chemical or category (e.g., 10595-60-5).
Sponsored Chemical Name The ninth collective index name of the sponsored chemical or category.
Sponsored Chemical Result Type Indicator showing whether the test result represents a measured or an estimated value for the sponsored chemical.
Study Reference Identify reference(s) used to compile the summary by entering: author(s), year, title, laboratory name, laboratory report number, report date (if published, list journal name, volume, pages).
Submission Name The sponsor provided name associated with the submission.
Submitter's Name The name of the individual company or consortium formally providing test plan related information.
Temperature The temperature, preferably in ºC, used in the experimental determination of the Test Value or assumed in the model, if estimated.
Temperature Unit Unit of measure used for the given temperature.
Test Conditions Remarks Additional comments describing the characteristics of the Test Conditions.
Test or Estimation Type Type of test or estimation performed.
Test Results A text description of the results of a test which are not captured as fielded data.
Test Substance CAS Number A standardized number assigned by the Chemical Abstracts Service (CAS) to identify a chemical (e.g., 10595-60-5).
Test Substance Chemical Name The ninth collective index name of the test substance.
Test Substance Purity The purity of the chemical used in the study or estimation. Not applicable to mixtures. Note if not available.
Test Substance Result Type Indicator showing whether the test result represents a measured or an estimated value for the test substance.
Year Study Performed If known, the sponsor provided year in which the test being described was conducted.

 

Jump to main content.